cmake version 2.8.10
------------------------------------------------------------------------------
Introduction

cmake-policies - Reference of CMake policies.

------------------------------------------------------------------------------
Description

The "cmake" executable is the CMake command-line interface.  It may be used
to configure projects in scripts.  Project configuration settings may be
specified on the command line with the -D option.  The -i option will cause
cmake to interactively prompt for such settings.

CMake is a cross-platform build system generator.  Projects specify their
build process with platform-independent CMake listfiles included in each
directory of a source tree with the name CMakeLists.txt.  Users build a
project by using CMake to generate a build system for a native tool on their
platform.

------------------------------------------------------------------------------
Policies

  CMP0000
       A minimum required CMake version must be specified.

       CMake requires that projects specify the version of CMake to which
       they have been written.  This policy has been put in place so users
       trying to build the project may be told when they need to update their
       CMake.  Specifying a version also helps the project build with CMake
       versions newer than that specified.  Use the cmake_minimum_required
       command at the top of your main CMakeLists.txt file:

         cmake_minimum_required(VERSION <major>.<minor>)

       where "<major>.<minor>" is the version of CMake you want to support
       (such as "2.6").  The command will ensure that at least the given
       version of CMake is running and help newer versions be compatible with
       the project.  See documentation of cmake_minimum_required for details.

       Note that the command invocation must appear in the CMakeLists.txt
       file itself; a call in an included file is not sufficient.  However,
       the cmake_policy command may be called to set policy CMP0000 to OLD or
       NEW behavior explicitly.  The OLD behavior is to silently ignore the
       missing invocation.  The NEW behavior is to issue an error instead of
       a warning.  An included file may set CMP0000 explicitly to affect how
       this policy is enforced for the main CMakeLists.txt file.

       This policy was introduced in CMake version 2.6.0.

  CMP0001
       CMAKE_BACKWARDS_COMPATIBILITY should no longer be used.

       The OLD behavior is to check CMAKE_BACKWARDS_COMPATIBILITY and present
       it to the user.  The NEW behavior is to ignore
       CMAKE_BACKWARDS_COMPATIBILITY completely.

       In CMake 2.4 and below the variable CMAKE_BACKWARDS_COMPATIBILITY was
       used to request compatibility with earlier versions of CMake.  In
       CMake 2.6 and above all compatibility issues are handled by policies
       and the cmake_policy command.  However, CMake must still check
       CMAKE_BACKWARDS_COMPATIBILITY for projects written for CMake 2.4 and
       below.

       This policy was introduced in CMake version 2.6.0.  CMake version
       2.8.10 warns when the policy is not set and uses OLD behavior.  Use
       the cmake_policy command to set it to OLD or NEW explicitly.

  CMP0002
       Logical target names must be globally unique.

       Targets names created with add_executable, add_library, or
       add_custom_target are logical build target names.  Logical target
       names must be globally unique because:

         - Unique names may be referenced unambiguously both in CMake
           code and on make tool command lines.
         - Logical names are used by Xcode and VS IDE generators
           to produce meaningful project names for the targets.

       The logical name of executable and library targets does not have to
       correspond to the physical file names built.  Consider using the
       OUTPUT_NAME target property to create two targets with the same
       physical name while keeping logical names distinct.  Custom targets
       must simply have globally unique names (unless one uses the global
       property ALLOW_DUPLICATE_CUSTOM_TARGETS with a Makefiles generator).

       This policy was introduced in CMake version 2.6.0.  CMake version
       2.8.10 warns when the policy is not set and uses OLD behavior.  Use
       the cmake_policy command to set it to OLD or NEW explicitly.

  CMP0003
       Libraries linked via full path no longer produce linker search paths.

       This policy affects how libraries whose full paths are NOT known are
       found at link time, but was created due to a change in how CMake deals
       with libraries whose full paths are known.  Consider the code

         target_link_libraries(myexe /path/to/libA.so)

       CMake 2.4 and below implemented linking to libraries whose full paths
       are known by splitting them on the link line into separate components
       consisting of the linker search path and the library name.  The
       example code might have produced something like

         ... -L/path/to -lA ...

       in order to link to library A.  An analysis was performed to order
       multiple link directories such that the linker would find library A in
       the desired location, but there are cases in which this does not work.
       CMake versions 2.6 and above use the more reliable approach of passing
       the full path to libraries directly to the linker in most cases.  The
       example code now produces something like

         ... /path/to/libA.so ....

       Unfortunately this change can break code like

         target_link_libraries(myexe /path/to/libA.so B)

       where "B" is meant to find "/path/to/libB.so".  This code is wrong
       because the user is asking the linker to find library B but has not
       provided a linker search path (which may be added with the
       link_directories command).  However, with the old linking
       implementation the code would work accidentally because the linker
       search path added for library A allowed library B to be found.

       In order to support projects depending on linker search paths added by
       linking to libraries with known full paths, the OLD behavior for this
       policy will add the linker search paths even though they are not
       needed for their own libraries.  When this policy is set to OLD, CMake
       will produce a link line such as

         ... -L/path/to /path/to/libA.so -lB ...

       which will allow library B to be found as it was previously.  When
       this policy is set to NEW, CMake will produce a link line such as

         ... /path/to/libA.so -lB ...

       which more accurately matches what the project specified.

       The setting for this policy used when generating the link line is that
       in effect when the target is created by an add_executable or
       add_library command.  For the example described above, the code

         cmake_policy(SET CMP0003 OLD) # or cmake_policy(VERSION 2.4)
         add_executable(myexe myexe.c)
         target_link_libraries(myexe /path/to/libA.so B)

       will work and suppress the warning for this policy.  It may also be
       updated to work with the corrected linking approach:

         cmake_policy(SET CMP0003 NEW) # or cmake_policy(VERSION 2.6)
         link_directories(/path/to) # needed to find library B
         add_executable(myexe myexe.c)
         target_link_libraries(myexe /path/to/libA.so B)

       Even better, library B may be specified with a full path:

         add_executable(myexe myexe.c)
         target_link_libraries(myexe /path/to/libA.so /path/to/libB.so)

       When all items on the link line have known paths CMake does not check
       this policy so it has no effect.

       Note that the warning for this policy will be issued for at most one
       target.  This avoids flooding users with messages for every target
       when setting the policy once will probably fix all targets.

       This policy was introduced in CMake version 2.6.0.  CMake version
       2.8.10 warns when the policy is not set and uses OLD behavior.  Use
       the cmake_policy command to set it to OLD or NEW explicitly.

  CMP0004
       Libraries linked may not have leading or trailing whitespace.

       CMake versions 2.4 and below silently removed leading and trailing
       whitespace from libraries linked with code like

         target_link_libraries(myexe " A ")

       This could lead to subtle errors in user projects.

       The OLD behavior for this policy is to silently remove leading and
       trailing whitespace.  The NEW behavior for this policy is to diagnose
       the existence of such whitespace as an error.  The setting for this
       policy used when checking the library names is that in effect when the
       target is created by an add_executable or add_library command.

       This policy was introduced in CMake version 2.6.0.  CMake version
       2.8.10 warns when the policy is not set and uses OLD behavior.  Use
       the cmake_policy command to set it to OLD or NEW explicitly.

  CMP0005
       Preprocessor definition values are now escaped automatically.

       This policy determines whether or not CMake should generate escaped
       preprocessor definition values added via add_definitions.  CMake
       versions 2.4 and below assumed that only trivial values would be given
       for macros in add_definitions calls.  It did not attempt to escape
       non-trivial values such as string literals in generated build rules.
       CMake versions 2.6 and above support escaping of most values, but
       cannot assume the user has not added escapes already in an attempt to
       work around limitations in earlier versions.

       The OLD behavior for this policy is to place definition values given
       to add_definitions directly in the generated build rules without
       attempting to escape anything.  The NEW behavior for this policy is to
       generate correct escapes for all native build tools automatically.
       See documentation of the COMPILE_DEFINITIONS target property for
       limitations of the escaping implementation.

       This policy was introduced in CMake version 2.6.0.  CMake version
       2.8.10 warns when the policy is not set and uses OLD behavior.  Use
       the cmake_policy command to set it to OLD or NEW explicitly.

  CMP0006
       Installing MACOSX_BUNDLE targets requires a BUNDLE DESTINATION.

       This policy determines whether the install(TARGETS) command must be
       given a BUNDLE DESTINATION when asked to install a target with the
       MACOSX_BUNDLE property set.  CMake 2.4 and below did not distinguish
       application bundles from normal executables when installing targets.
       CMake 2.6 provides a BUNDLE option to the install(TARGETS) command
       that specifies rules specific to application bundles on the Mac.
       Projects should use this option when installing a target with the
       MACOSX_BUNDLE property set.

       The OLD behavior for this policy is to fall back to the RUNTIME
       DESTINATION if a BUNDLE DESTINATION is not given.  The NEW behavior
       for this policy is to produce an error if a bundle target is installed
       without a BUNDLE DESTINATION.

       This policy was introduced in CMake version 2.6.0.  CMake version
       2.8.10 warns when the policy is not set and uses OLD behavior.  Use
       the cmake_policy command to set it to OLD or NEW explicitly.

  CMP0007
       list command no longer ignores empty elements.

       This policy determines whether the list command will ignore empty
       elements in the list.  CMake 2.4 and below list commands ignored all
       empty elements in the list.  For example, a;b;;c would have length 3
       and not 4.  The OLD behavior for this policy is to ignore empty list
       elements.  The NEW behavior for this policy is to correctly count
       empty elements in a list.

       This policy was introduced in CMake version 2.6.0.  CMake version
       2.8.10 warns when the policy is not set and uses OLD behavior.  Use
       the cmake_policy command to set it to OLD or NEW explicitly.

  CMP0008
       Libraries linked by full-path must have a valid library file name.

       In CMake 2.4 and below it is possible to write code like

         target_link_libraries(myexe /full/path/to/somelib)

       where "somelib" is supposed to be a valid library file name such as
       "libsomelib.a" or "somelib.lib".  For Makefile generators this
       produces an error at build time because the dependency on the full
       path cannot be found.  For VS IDE and Xcode generators this used to
       work by accident because CMake would always split off the library
       directory and ask the linker to search for the library by name
       (-lsomelib or somelib.lib).  Despite the failure with Makefiles, some
       projects have code like this and build only with VS and/or Xcode.
       This version of CMake prefers to pass the full path directly to the
       native build tool, which will fail in this case because it does not
       name a valid library file.

       This policy determines what to do with full paths that do not appear
       to name a valid library file.  The OLD behavior for this policy is to
       split the library name from the path and ask the linker to search for
       it.  The NEW behavior for this policy is to trust the given path and
       pass it directly to the native build tool unchanged.

       This policy was introduced in CMake version 2.6.1.  CMake version
       2.8.10 warns when the policy is not set and uses OLD behavior.  Use
       the cmake_policy command to set it to OLD or NEW explicitly.

  CMP0009
       FILE GLOB_RECURSE calls should not follow symlinks by default.

       In CMake 2.6.1 and below, FILE GLOB_RECURSE calls would follow through
       symlinks, sometimes coming up with unexpectedly large result sets
       because of symlinks to top level directories that contain hundreds of
       thousands of files.

       This policy determines whether or not to follow symlinks encountered
       during a FILE GLOB_RECURSE call.  The OLD behavior for this policy is
       to follow the symlinks.  The NEW behavior for this policy is not to
       follow the symlinks by default, but only if FOLLOW_SYMLINKS is given
       as an additional argument to the FILE command.

       This policy was introduced in CMake version 2.6.2.  CMake version
       2.8.10 warns when the policy is not set and uses OLD behavior.  Use
       the cmake_policy command to set it to OLD or NEW explicitly.

  CMP0010
       Bad variable reference syntax is an error.

       In CMake 2.6.2 and below, incorrect variable reference syntax such as
       a missing close-brace ("${FOO") was reported but did not stop
       processing of CMake code.  This policy determines whether a bad
       variable reference is an error.  The OLD behavior for this policy is
       to warn about the error, leave the string untouched, and continue.
       The NEW behavior for this policy is to report an error.

       This policy was introduced in CMake version 2.6.3.  CMake version
       2.8.10 warns when the policy is not set and uses OLD behavior.  Use
       the cmake_policy command to set it to OLD or NEW explicitly.

  CMP0011
       Included scripts do automatic cmake_policy PUSH and POP.

       In CMake 2.6.2 and below, CMake Policy settings in scripts loaded by
       the include() and find_package() commands would affect the includer.
       Explicit invocations of cmake_policy(PUSH) and cmake_policy(POP) were
       required to isolate policy changes and protect the includer.  While
       some scripts intend to affect the policies of their includer, most do
       not.  In CMake 2.6.3 and above, include() and find_package() by
       default PUSH and POP an entry on the policy stack around an included
       script, but provide a NO_POLICY_SCOPE option to disable it.  This
       policy determines whether or not to imply NO_POLICY_SCOPE for
       compatibility.  The OLD behavior for this policy is to imply
       NO_POLICY_SCOPE for include() and find_package() commands.  The NEW
       behavior for this policy is to allow the commands to do their default
       cmake_policy PUSH and POP.

       This policy was introduced in CMake version 2.6.3.  CMake version
       2.8.10 warns when the policy is not set and uses OLD behavior.  Use
       the cmake_policy command to set it to OLD or NEW explicitly.

  CMP0012
       if() recognizes numbers and boolean constants.

       In CMake versions 2.6.4 and lower the if() command implicitly
       dereferenced arguments corresponding to variables, even those named
       like numbers or boolean constants, except for 0 and 1.  Numbers and
       boolean constants such as true, false, yes, no, on, off, y, n,
       notfound, ignore (all case insensitive) were recognized in some cases
       but not all.  For example, the code "if(TRUE)" might have evaluated as
       false.  Numbers such as 2 were recognized only in boolean expressions
       like "if(NOT 2)" (leading to false) but not as a single-argument like
       "if(2)" (also leading to false).  Later versions of CMake prefer to
       treat numbers and boolean constants literally, so they should not be
       used as variable names.

       The OLD behavior for this policy is to implicitly dereference
       variables named like numbers and boolean constants.  The NEW behavior
       for this policy is to recognize numbers and boolean constants without
       dereferencing variables with such names.

       This policy was introduced in CMake version 2.8.0.  CMake version
       2.8.10 warns when the policy is not set and uses OLD behavior.  Use
       the cmake_policy command to set it to OLD or NEW explicitly.

  CMP0013
       Duplicate binary directories are not allowed.

       CMake 2.6.3 and below silently permitted add_subdirectory() calls to
       create the same binary directory multiple times.  During build system
       generation files would be written and then overwritten in the build
       tree and could lead to strange behavior.  CMake 2.6.4 and above
       explicitly detect duplicate binary directories.  CMake 2.6.4 always
       considers this case an error.  In CMake 2.8.0 and above this policy
       determines whether or not the case is an error.  The OLD behavior for
       this policy is to allow duplicate binary directories.  The NEW
       behavior for this policy is to disallow duplicate binary directories
       with an error.

       This policy was introduced in CMake version 2.8.0.  CMake version
       2.8.10 warns when the policy is not set and uses OLD behavior.  Use
       the cmake_policy command to set it to OLD or NEW explicitly.

  CMP0014
       Input directories must have CMakeLists.txt.

       CMake versions before 2.8 silently ignored missing CMakeLists.txt
       files in directories referenced by add_subdirectory() or subdirs(),
       treating them as if present but empty.  In CMake 2.8.0 and above this
       policy determines whether or not the case is an error.  The OLD
       behavior for this policy is to silently ignore the problem.  The NEW
       behavior for this policy is to report an error.

       This policy was introduced in CMake version 2.8.0.  CMake version
       2.8.10 warns when the policy is not set and uses OLD behavior.  Use
       the cmake_policy command to set it to OLD or NEW explicitly.

  CMP0015
       link_directories() treats paths relative to the source dir.

       In CMake 2.8.0 and lower the link_directories() command passed
       relative paths unchanged to the linker.  In CMake 2.8.1 and above the
       link_directories() command prefers to interpret relative paths with
       respect to CMAKE_CURRENT_SOURCE_DIR, which is consistent with
       include_directories() and other commands.  The OLD behavior for this
       policy is to use relative paths verbatim in the linker command.  The
       NEW behavior for this policy is to convert relative paths to absolute
       paths by appending the relative path to CMAKE_CURRENT_SOURCE_DIR.

       This policy was introduced in CMake version 2.8.1.  CMake version
       2.8.10 warns when the policy is not set and uses OLD behavior.  Use
       the cmake_policy command to set it to OLD or NEW explicitly.

  CMP0016
       target_link_libraries() reports error if only argument is not a
       target.

       In CMake 2.8.2 and lower the target_link_libraries() command silently
       ignored if it was called with only one argument, and this argument
       wasn't a valid target.  In CMake 2.8.3 and above it reports an error
       in this case.

       This policy was introduced in CMake version 2.8.3.  CMake version
       2.8.10 warns when the policy is not set and uses OLD behavior.  Use
       the cmake_policy command to set it to OLD or NEW explicitly.

  CMP0017
       Prefer files from the CMake module directory when including from
       there.

       Starting with CMake 2.8.4, if a cmake-module shipped with CMake (i.e.
       located in the CMake module directory) calls include() or
       find_package(), the files located in the the CMake module directory
       are preferred over the files in CMAKE_MODULE_PATH.  This makes sure
       that the modules belonging to CMake always get those files included
       which they expect, and against which they were developed and tested.
       In call other cases, the files found in CMAKE_MODULE_PATH still take
       precedence over the ones in the CMake module directory.  The OLD
       behaviour is to always prefer files from CMAKE_MODULE_PATH over files
       from the CMake modules directory.

       This policy was introduced in CMake version 2.8.4.  CMake version
       2.8.10 warns when the policy is not set and uses OLD behavior.  Use
       the cmake_policy command to set it to OLD or NEW explicitly.

  CMP0018
       Ignore CMAKE_SHARED_LIBRARY_<Lang>_FLAGS variable.

       CMake 2.8.8 and lower compiled sources in SHARED and MODULE libraries
       using the value of the undocumented CMAKE_SHARED_LIBRARY_<Lang>_FLAGS
       platform variable.  The variable contained platform-specific flags
       needed to compile objects for shared libraries.  Typically it included
       a flag such as -fPIC for position independent code but also included
       other flags needed on certain platforms.  CMake 2.8.9 and higher
       prefer instead to use the POSITION_INDEPENDENT_CODE target property to
       determine what targets should be position independent, and new
       undocumented platform variables to select flags while ignoring
       CMAKE_SHARED_LIBRARY_<Lang>_FLAGS completely.

       The default for either approach produces identical compilation flags,
       but if a project modifies CMAKE_SHARED_LIBRARY_<Lang>_FLAGS from its
       original value this policy determines which approach to use.

       The OLD behavior for this policy is to ignore the
       POSITION_INDEPENDENT_CODE property for all targets and use the
       modified value of CMAKE_SHARED_LIBRARY_<Lang>_FLAGS for SHARED and
       MODULE libraries.

       The NEW behavior for this policy is to ignore
       CMAKE_SHARED_LIBRARY_<Lang>_FLAGS whether it is modified or not and
       honor the POSITION_INDEPENDENT_CODE target property.

       This policy was introduced in CMake version 2.8.9.  CMake version
       2.8.10 warns when the policy is not set and uses OLD behavior.  Use
       the cmake_policy command to set it to OLD or NEW explicitly.

------------------------------------------------------------------------------
Copyright

Copyright 2000-2009 Kitware, Inc., Insight Software Consortium.  All rights
reserved.

Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:

Redistributions of source code must retain the above copyright notice, this
list of conditions and the following disclaimer.

Redistributions in binary form must reproduce the above copyright notice,
this list of conditions and the following disclaimer in the documentation
and/or other materials provided with the distribution.

Neither the names of Kitware, Inc., the Insight Software Consortium, nor the
names of their contributors may be used to endorse or promote products
derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.

------------------------------------------------------------------------------
See Also

.B ccmake(1), cpack(1), ctest(1), cmakecommands(1), cmakecompat(1),
cmakemodules(1), cmakeprops(1), cmakevars(1)

The following resources are available to get help using CMake:

  Home Page
       http://www.cmake.org

       The primary starting point for learning about CMake.

  Frequently Asked Questions
       http://www.cmake.org/Wiki/CMake_FAQ

       A Wiki is provided containing answers to frequently asked questions.

  Online Documentation
       http://www.cmake.org/HTML/Documentation.html

       Links to available documentation may be found on this web page.

  Mailing List
       http://www.cmake.org/HTML/MailingLists.html

       For help and discussion about using cmake, a mailing list is provided
       at cmake@cmake.org.  The list is member-post-only but one may sign up
       on the CMake web page.  Please first read the full documentation at
       http://www.cmake.org before posting questions to the list.

