[go: up one dir, main page]

Duvall et al., 1993 - Google Patents

Creep and stress rupture testing of polyethylene sheet under equal biaxial tensile stresses

Duvall et al., 1993

Document ID
9261877961923978189
Author
Duvall D
Edwards D
Publication year
Publication venue
Journal of reinforced plastics and composites

External Links

Snippet

A medium density (approximately 0.94 g/cm3) polyethylene sheet, approx imately 1.5 mm thick, was subjected to equal biaxial tension stresses by way of an axisym metric loading system. Tests were conducted at room temperature and at loads of≤ 60% of the product's …
Continue reading at journals.sagepub.com (other versions)

Classifications

    • G—PHYSICS
    • G01—MEASURING; TESTING
    • G01N—INVESTIGATING OR ANALYSING MATERIALS BY DETERMINING THEIR CHEMICAL OR PHYSICAL PROPERTIES
    • G01N2203/00—Investigating strength properties of solid materials by application of mechanical stress
    • G01N2203/0014—Type of force applied
    • G01N2203/0016—Tensile or compressive
    • G01N2203/0019—Compressive
    • G—PHYSICS
    • G01—MEASURING; TESTING
    • G01N—INVESTIGATING OR ANALYSING MATERIALS BY DETERMINING THEIR CHEMICAL OR PHYSICAL PROPERTIES
    • G01N2203/00—Investigating strength properties of solid materials by application of mechanical stress
    • G01N2203/02—Details not specific for a particular testing method
    • G01N2203/0202—Control of the test
    • G01N2203/0212—Theories, calculations
    • G—PHYSICS
    • G01—MEASURING; TESTING
    • G01N—INVESTIGATING OR ANALYSING MATERIALS BY DETERMINING THEIR CHEMICAL OR PHYSICAL PROPERTIES
    • G01N2203/00—Investigating strength properties of solid materials by application of mechanical stress
    • G01N2203/02—Details not specific for a particular testing method
    • G01N2203/026—Specifications of the specimen
    • G—PHYSICS
    • G01—MEASURING; TESTING
    • G01N—INVESTIGATING OR ANALYSING MATERIALS BY DETERMINING THEIR CHEMICAL OR PHYSICAL PROPERTIES
    • G01N2203/00—Investigating strength properties of solid materials by application of mechanical stress
    • G01N2203/02—Details not specific for a particular testing method
    • G01N2203/025—Geometry of the test
    • G—PHYSICS
    • G01—MEASURING; TESTING
    • G01N—INVESTIGATING OR ANALYSING MATERIALS BY DETERMINING THEIR CHEMICAL OR PHYSICAL PROPERTIES
    • G01N3/00—Investigating strength properties of solid materials by application of mechanical stress
    • G01N3/08—Investigating strength properties of solid materials by application of mechanical stress by applying steady tensile or compressive forces
    • G01N3/10—Investigating strength properties of solid materials by application of mechanical stress by applying steady tensile or compressive forces generated by pneumatic or hydraulic pressure
    • G—PHYSICS
    • G01—MEASURING; TESTING
    • G01N—INVESTIGATING OR ANALYSING MATERIALS BY DETERMINING THEIR CHEMICAL OR PHYSICAL PROPERTIES
    • G01N2203/00—Investigating strength properties of solid materials by application of mechanical stress
    • G01N2203/0058—Kind of property studied
    • G01N2203/006—Crack, flaws, fracture or rupture
    • G01N2203/0062—Crack or flaws
    • G—PHYSICS
    • G01—MEASURING; TESTING
    • G01N—INVESTIGATING OR ANALYSING MATERIALS BY DETERMINING THEIR CHEMICAL OR PHYSICAL PROPERTIES
    • G01N3/00—Investigating strength properties of solid materials by application of mechanical stress
    • G01N3/40—Investigating hardness or rebound hardness
    • G01N3/42—Investigating hardness or rebound hardness by performing impressions under a steady load by indentors, e.g. sphere, pyramid

Similar Documents

Publication Publication Date Title
Ellyin et al. In-phase and out-of-phase multiaxial fatigue
EP1599277B1 (en) Ptfe membranes and gaskets made therefrom
Djebli et al. Experimental analysis and damage modeling of high-density polyethylene under fatigue loading
Duvall et al. Creep and stress rupture testing of polyethylene sheet under equal biaxial tensile stresses
El-Sayed et al. Leak before break fracture assessment of pressurized unplasticized PVC pipes with axial surface crack: Experimental and analytical analysis
Deschanel et al. Mechanical response and fracture dynamics of polymeric foams
Deschanel et al. Experimental study of crackling noise: conditions on power law scaling correlated withfracture precursors
US20040175571A1 (en) Filled PTFE membranes and gaskets made therefrom
Barbero et al. Long-term testing of trenchless pipe liners
De Waele et al. Feasibility of integrated optical fibre sensors for condition monitoring of composite structures. Part II: Combination of Bragg-sensors and acoustic emission detection
Shin et al. Screening technique of hydrogen embrittlement sensitivity in austenitic stainless steels using in-situ small punch test method
Peggs Destructive testing of polyethylene geomembrane seams: Various methods to evaluate seam strength
Shin et al. Evaluation of material compatibility for hydrogen applications using performance factors obtained by in-situ SP test
Le Saux et al. High temperature expansion due to compression test for the determination of a cladding material failure criterion under RIA loading conditions
Murariu et al. Long-term behaviour of polyethylene PE 80 pressurized pipes, in presence of longitudinal simulated imperfections
Julisch et al. Exclusion of rupture for welded piping systems of power stations by component tests and failure approaches
TEH et al. IMPACT DEMAGE DEVELOPMENT AND RESIDUAL COMPRESSION PERFORMANCE OF ADVANCE COMPOSITE MATERIAL SYSTEMS
Jeya et al. HDPE and PVC creep and thermal ratcheting behavior under compression
Prakash et al. Evaluation of fatigue data through miniature specimen test techniques
Krishnaswamy et al. Is PENT a True Indicator of PE Pipe Slow Crack Growth Resistance?
Zhang Damage in Polyethylene and its Pressure Pipe-Characterization and Detection Methods
Liu et al. Technical Basis for Proposed Code Case on Evaluation of Flaws in Butt Fusion Joints in Class 3 High Density Polyethylene Piping
Komorowski et al. Compression-Dominated Fatigue Loading
Stokes Hydrogen permeability of polymer based composites under bi-axial strain and cryogenic temperatures
Reuter et al. Estimating structural integrity, using the TPFC approach, of annealed type 304 stainless steel plate and pipes containing surface defects