[go: up one dir, main page]

Long et al., 2008 - Google Patents

A 1.8-V 3.1 mW successive approximation ADC in system-on-chip

Long et al., 2008

Document ID
18118240275361040377
Author
Long S
Wu J
Xia X
Shi L
Publication year
Publication venue
Analog Integrated Circuits and Signal Processing

External Links

Snippet

This paper describes a 10-bit 2.5 Msample/s successive approximation analog-to-digital converter (ADC) for SoC system. Based on conventional successive approximation ADC architecture a new and faster solution is used. The new solution consists of bootstrap switch …
Continue reading at link.springer.com (other versions)

Classifications

    • H—ELECTRICITY
    • H03—BASIC ELECTRONIC CIRCUITRY
    • H03M—CODING; DECODING; CODE CONVERSION IN GENERAL
    • H03M1/00—Analogue/digital conversion; Digital/analogue conversion
    • H03M1/12—Analogue/digital converters
    • H03M1/34—Analogue value compared with reference values
    • H03M1/38—Analogue value compared with reference values sequentially only, e.g. successive approximation type
    • H03M1/46—Analogue value compared with reference values sequentially only, e.g. successive approximation type with digital/analogue converter for supplying reference values to converter
    • H03M1/466—Analogue value compared with reference values sequentially only, e.g. successive approximation type with digital/analogue converter for supplying reference values to converter using switched capacitors
    • H03M1/468—Analogue value compared with reference values sequentially only, e.g. successive approximation type with digital/analogue converter for supplying reference values to converter using switched capacitors in which the input S/H circuit is merged with the feedback DAC array
    • H—ELECTRICITY
    • H03—BASIC ELECTRONIC CIRCUITRY
    • H03M—CODING; DECODING; CODE CONVERSION IN GENERAL
    • H03M1/00—Analogue/digital conversion; Digital/analogue conversion
    • H03M1/06—Continuously compensating for, or preventing, undesired influence of physical parameters
    • H03M1/0617—Continuously compensating for, or preventing, undesired influence of physical parameters characterised by the use of methods or means not specific to a particular type of detrimental influence
    • H03M1/0675—Continuously compensating for, or preventing, undesired influence of physical parameters characterised by the use of methods or means not specific to a particular type of detrimental influence using redundancy
    • H03M1/0678—Continuously compensating for, or preventing, undesired influence of physical parameters characterised by the use of methods or means not specific to a particular type of detrimental influence using redundancy using additional components or elements, e.g. dummy components
    • H03M1/068—Continuously compensating for, or preventing, undesired influence of physical parameters characterised by the use of methods or means not specific to a particular type of detrimental influence using redundancy using additional components or elements, e.g. dummy components the original and additional components or elements being complementary to each other, e.g. CMOS
    • H03M1/0682—Continuously compensating for, or preventing, undesired influence of physical parameters characterised by the use of methods or means not specific to a particular type of detrimental influence using redundancy using additional components or elements, e.g. dummy components the original and additional components or elements being complementary to each other, e.g. CMOS using a differential network structure, i.e. symmetrical with respect to ground
    • H—ELECTRICITY
    • H03—BASIC ELECTRONIC CIRCUITRY
    • H03M—CODING; DECODING; CODE CONVERSION IN GENERAL
    • H03M1/00—Analogue/digital conversion; Digital/analogue conversion
    • H03M1/12—Analogue/digital converters
    • H03M1/34—Analogue value compared with reference values
    • H03M1/36—Analogue value compared with reference values simultaneously only, i.e. parallel type
    • H03M1/361—Analogue value compared with reference values simultaneously only, i.e. parallel type having a separate comparator and reference value for each quantisation level, i.e. full flash converter type
    • H03M1/362—Analogue value compared with reference values simultaneously only, i.e. parallel type having a separate comparator and reference value for each quantisation level, i.e. full flash converter type the reference values being generated by a resistive voltage divider
    • H03M1/365—Analogue value compared with reference values simultaneously only, i.e. parallel type having a separate comparator and reference value for each quantisation level, i.e. full flash converter type the reference values being generated by a resistive voltage divider the voltage divider being a single resistor string
    • H—ELECTRICITY
    • H03—BASIC ELECTRONIC CIRCUITRY
    • H03M—CODING; DECODING; CODE CONVERSION IN GENERAL
    • H03M1/00—Analogue/digital conversion; Digital/analogue conversion
    • H03M1/66—Digital/analogue converters
    • H03M1/74—Simultaneous conversion
    • H03M1/80—Simultaneous conversion using weighted impedances
    • H—ELECTRICITY
    • H03—BASIC ELECTRONIC CIRCUITRY
    • H03M—CODING; DECODING; CODE CONVERSION IN GENERAL
    • H03M1/00—Analogue/digital conversion; Digital/analogue conversion
    • H03M1/12—Analogue/digital converters
    • H03M1/14—Conversion in steps with each step involving the same or a different conversion means and delivering more than one bit
    • H03M1/16—Conversion in steps with each step involving the same or a different conversion means and delivering more than one bit with scale factor modification, i.e. by changing the amplification between the steps
    • H03M1/164—Conversion in steps with each step involving the same or a different conversion means and delivering more than one bit with scale factor modification, i.e. by changing the amplification between the steps the steps being performed sequentially in series-connected stages
    • H—ELECTRICITY
    • H03—BASIC ELECTRONIC CIRCUITRY
    • H03M—CODING; DECODING; CODE CONVERSION IN GENERAL
    • H03M1/00—Analogue/digital conversion; Digital/analogue conversion
    • H03M1/12—Analogue/digital converters
    • H03M1/1205—Multiplexed conversion systems
    • H03M1/121—Interleaved, i.e. using multiple converters or converter parts for one channel
    • H03M1/1215—Interleaved, i.e. using multiple converters or converter parts for one channel using time-division multiplexing
    • H—ELECTRICITY
    • H03—BASIC ELECTRONIC CIRCUITRY
    • H03M—CODING; DECODING; CODE CONVERSION IN GENERAL
    • H03M1/00—Analogue/digital conversion; Digital/analogue conversion
    • H03M1/06—Continuously compensating for, or preventing, undesired influence of physical parameters
    • H03M1/0617—Continuously compensating for, or preventing, undesired influence of physical parameters characterised by the use of methods or means not specific to a particular type of detrimental influence
    • H03M1/0675—Continuously compensating for, or preventing, undesired influence of physical parameters characterised by the use of methods or means not specific to a particular type of detrimental influence using redundancy
    • H03M1/069—Continuously compensating for, or preventing, undesired influence of physical parameters characterised by the use of methods or means not specific to a particular type of detrimental influence using redundancy by range overlap between successive stages or steps
    • H—ELECTRICITY
    • H03—BASIC ELECTRONIC CIRCUITRY
    • H03M—CODING; DECODING; CODE CONVERSION IN GENERAL
    • H03M1/00—Analogue/digital conversion; Digital/analogue conversion
    • H03M1/12—Analogue/digital converters
    • H03M1/14—Conversion in steps with each step involving the same or a different conversion means and delivering more than one bit
    • H03M1/145—Conversion in steps with each step involving the same or a different conversion means and delivering more than one bit the steps being performed sequentially in series-connected stages
    • H—ELECTRICITY
    • H03—BASIC ELECTRONIC CIRCUITRY
    • H03M—CODING; DECODING; CODE CONVERSION IN GENERAL
    • H03M1/00—Analogue/digital conversion; Digital/analogue conversion
    • H03M1/06—Continuously compensating for, or preventing, undesired influence of physical parameters
    • H03M1/0617—Continuously compensating for, or preventing, undesired influence of physical parameters characterised by the use of methods or means not specific to a particular type of detrimental influence
    • H03M1/0634—Continuously compensating for, or preventing, undesired influence of physical parameters characterised by the use of methods or means not specific to a particular type of detrimental influence by averaging out the errors, e.g. using sliding scale
    • H—ELECTRICITY
    • H03—BASIC ELECTRONIC CIRCUITRY
    • H03M—CODING; DECODING; CODE CONVERSION IN GENERAL
    • H03M1/00—Analogue/digital conversion; Digital/analogue conversion
    • H03M1/06—Continuously compensating for, or preventing, undesired influence of physical parameters
    • H03M1/0617—Continuously compensating for, or preventing, undesired influence of physical parameters characterised by the use of methods or means not specific to a particular type of detrimental influence
    • H03M1/0626—Continuously compensating for, or preventing, undesired influence of physical parameters characterised by the use of methods or means not specific to a particular type of detrimental influence by filtering
    • H—ELECTRICITY
    • H03—BASIC ELECTRONIC CIRCUITRY
    • H03M—CODING; DECODING; CODE CONVERSION IN GENERAL
    • H03M1/00—Analogue/digital conversion; Digital/analogue conversion
    • H03M1/10—Calibration or testing
    • H03M1/1009—Calibration
    • H03M1/1033—Calibration over the full range of the converter, e.g. for correcting differential non-linearity
    • H03M1/1057—Calibration over the full range of the converter, e.g. for correcting differential non-linearity by trimming, i.e. by individually adjusting at least part of the quantisation value generators or stages to their nominal values
    • H—ELECTRICITY
    • H03—BASIC ELECTRONIC CIRCUITRY
    • H03M—CODING; DECODING; CODE CONVERSION IN GENERAL
    • H03M1/00—Analogue/digital conversion; Digital/analogue conversion
    • H03M1/12—Analogue/digital converters
    • H03M1/124—Sampling or signal conditioning arrangements specially adapted for A/D converters
    • H03M1/1245—Details of sampling arrangements or methods
    • H—ELECTRICITY
    • H03—BASIC ELECTRONIC CIRCUITRY
    • H03M—CODING; DECODING; CODE CONVERSION IN GENERAL
    • H03M1/00—Analogue/digital conversion; Digital/analogue conversion
    • H03M1/66—Digital/analogue converters
    • H03M1/68—Digital/analogue converters with conversions of different sensitivity, i.e. one conversion relating to the more significant digital bits and another conversion to the less significant bits
    • H—ELECTRICITY
    • H03—BASIC ELECTRONIC CIRCUITRY
    • H03M—CODING; DECODING; CODE CONVERSION IN GENERAL
    • H03M1/00—Analogue/digital conversion; Digital/analogue conversion
    • H03M1/66—Digital/analogue converters
    • H03M1/662—Multiplexed conversion systems

Similar Documents

Publication Publication Date Title
KR101512098B1 (en) SAR ADC using C-R hybrid DAC
US8957803B2 (en) Capacitive voltage divider
Ishikawa et al. An 8-bit 50-MHz CMOS subranging A/D converter with pipelined wide-band S/H
CN110504971B (en) Analog-to-digital converter based on storage capacitor
Liu et al. A high linear voltage-to-time converter (VTC) with 1.2 V input range for time-domain analog-to-digital converters
Sotoudeh et al. A four-level switching scheme for SAR ADCs with 87.5% area saving and 97.85% energy-reduction
Li et al. High-resolution and high-speed integrated cmos ad converters for low-power applications
KR101686217B1 (en) Two-Channel Asynchronous SAR ADC
Long et al. A 1.8-V 3.1 mW successive approximation ADC in system-on-chip
Abougindia et al. A precision comparator design with a new foreground offset calibration technique
Dai et al. A 10-bit 2.5-MS/s SAR ADC with 60.46 dB SNDR in 0.13-μm CMOS technology
Jin et al. A dual-residue pipelined SAR ADC using only zero-crossing signals
Liu et al. A 12-bit 120-MS/s SAR ADC with improved split capacitive DAC and low-noise dynamic comparator
An et al. A two-Channel 10b 160 MS/s 28 nm CMOS asynchronous pipelined-SAR ADC with low channel mismatch
Zhu et al. A voltage feedback charge compensation technique for split DAC architecture in SAR ADCs
Huang et al. A time-interleaved pipelined ADC chip design for 4-G application
Gu et al. An 11-bit 22-MS/s 0.6 mW SAR ADC with parasitic capacitance compensation
Liu et al. A highly energy-efficient switching scheme for SAR ADC with the redundant capacitance splitting technology
Park et al. Design techniques for high performance CMOS flash analog-to-digital converters
KR101277558B1 (en) Analog-to-Digital Converter using range-scaling method
Zhang et al. Low-Power Nyquist ADCs
Huang Low-Power High-Performance SAR ADCs for Sensor Applications
Duan et al. A 6.3 GHz high bandwidth voltage-to-time converter with high linearity
Silva Pipelined Analog-To-Digital Conversion Using Current-Mode Reference Shifting
Jin Design and Implementation of High Performance Pipelined SAR ADC for Wireless Communications