Best Metrology Software in Europe

Use Calibration Control (CC) for Calibration, Maintenance, or general Asset Management. Quickly and visually track equipment that requires Calibration or Maintenance using customizable highlighted grids, auto emails, or reports. Maintain histories with audit trails relating to equipment traceability, people, companies, related documents, attachments, certificates, & more. Automate Calibration Control with custom or default barcode labels scanned by time-saver data entry dialogs to increase speed and traceability. Use the Report Designer for custom reports or modify existing reports. ISO, FDA, & ANSI quality systems use CC to maintain compliance and effortlessly communicate that compliance to auditors and internal customers. Although CC grew up in a Manufacturing environment, it is also used in other industries like Metrology Services, Health Care, Aviation/Aerospace, Mining, Testing, Maintenance, Designer Engineering, Oil Wells, Distribution, Packaging, and others.

Supporting everything from manual to fully automated calibration all using your lab’s 17025 measurement uncertainty calculations. With Metrology.NET’s standardized module-based “taxonomy” approach, creating automation has never been faster. New automated calibration procedures are created in three easy steps. First, create the test points with pass-fail limits. Next, add the instrument setting, and finally, create a VISA script using Metrology blocks. Metrology.NET is all about the reuse of software tools across all disciplines, which is an efficient use of resources. Metrology.NET does it all, DC & low frequency, RF and microwave, torque, temperature, flow, force, humidity, mass, pressure, you name it. Plus, everything is designed on a sustainable software framework. As 21st-century engineered software, Metrology.NET incorporates the best of current technologies. Not just buzzwords, Metrology.NET is truly a scalable, low-code, future-proof solution built for metrology.

KurtSPC Premium statistical process control software allows you to collect data from most devices, and provide it at one location optimizing your manufacturing. Statistical process control (SPC) is used to monitor and control a process to ensure that this process operates at its full potential. At full potential, a manufacturing process is capable of creating as much conforming product as possible with a minimum of waste. KurtSPC Premium statistical process control software is a simple-to-configure, easy-to-use solution for process optimization. KurtSPC Premium software features user-definable collection fields, error codes, and graphical or text operator instructions. It supports voice and video, customized screens and reports, machine tool controls, and automated gauging. The software also supports almost all types of gages and metrology tools, networking, and Kurt’s unique and powerful Event/Actions.

For almost three decades, Prime Technologies has been an industry leader for calibration & maintenance management software. Thousands of companies around the globe use our programs to achieve total paperless operations. Powerful math and data verification features are designed to ensure FDA, ISO and other regulatory requirement. The program also supports off-line and automated calibrations with tablets/laptops and documenting process calibrators. For life sciences facilities, each version release is pre-validated and 21 CFR Part 11 compliant. Accounts can be segmented ad individually configured to meet single site workflow preferences use or harmonized for enterprise level deployment. APIs and technical services are available for integration to ERP, CMMS, LIMS and other applications.

SpatialAnalyzer is the premier portable metrology software solution for large-scale applications. SA is an instrument-independent, traceable 3D graphical software platform that makes it easy for users to integrate data from multiple instruments and perform complex tasks simply, ultimately improving productivity. SA is a highly flexible, instrument-independent, traceable 3D graphical software platform that makes it easy for users to inspect parts. Analyze data, report, and reverse design. Interface with virtually any type of portable metrology instrument, and automate complex operations to improve measurement and inspection efficiencies. Address a broad spectrum of problems ranging from simple to complex. Save time, money, and effort, and ultimately improve productivity. Establish ROI and accomplish goals that were previously impossible. Instrument-independent, SA can simultaneously communicate with virtually any number and type of portable metrology instruments.

A very capable, flexible, and yet intuitive metrology software, TANGRAM offers a totally graphical approach with no need to learn any complex programming language and fits each customer's need perfectly. TANGRAM is developed for users who need simple, economical, easy-to-use metrology software that does only what they need. TANGRAM offers the correct balance of functionality, usability, and performance and is the final piece of the flexible gauging solution and of CMM functionality. Graphical, in-line element reporting easing element form and position deviation evaluation. Simplified and advanced reference system creation. Measurements may be stored in an Access database, and thus be accessed by any application for special calculations, statistics, and integration to other applications. Special calculations may be added with a Pascal-like inner language for advanced users. Geometric tolerancing and relations between elements and dry-run mode for checking program flow.

Elements® is a 2D CAD-based metrology software, ideal for measuring parts with very high feature density. It creates measurement routines directly from 2D CAD files with ease. It then automatically optimizes measurement paths to ensure data is gathered as quickly as possible. The Elements advantage lies in handling vast numbers of discrete features quickly and efficiently. CAD import formats include DXF, Gerber, as well as CSV location lists. Advanced review mode allows the user to visually inspect specific features in real time after a run has been completed. The coarse alignment feature allows the positioning of finders to be updated in real time for more accurate measurements. Built-in analysis tools allow for quick and easy analysis of large data trends. These tools include scatter plots, histograms of dimensional values, and whisker plots showing deviation from nominal. Evaluate your measurement requirements and recommend the solution that best fits your needs.

TurnCheck software is fast and easy to program with a focus on what you want to measure rather than how to measure it. Automatic feature extraction immediately finds and measures all part features in a single scan. A single image displaying the entire part allows you to easily see all basic shaft measurements at once. Rotational scans can be done for form and runout measurements providing plots to truly visualize the results. Pre-programmed parts are automatically rotationally aligned allowing for fast and intelligent one-touch measurement every time. For effortless thread analysis, a large variety of common types are part of an integrated thread library to quickly obtain results such as pitch and major/minor diameter. Data points can be compared directly to a DXF model including 2D GD&T analysis. Additional data points can be output to optional SmartProfile® software for 3D analysis and advanced GD&T.

Scan-X® is a powerful, yet easy-to-use, surface profiling software package that allows users to visualize and make measurements from surfaces. Scan-X analyzes laser scan data to produce a high-resolution, two-dimensional profile and/or three-dimensional raster. Users can also use Scan-X offline to evaluate imported laser scan data from external sources, such as a video measuring system. Scan-X has adjustable cursors for quick and easy measurements. Users can archive measurement results and utilize playback mode for automatic inspections. OGP authorized representatives are metrology specialists, qualified to evaluate your measurement requirements and recommend the solution that best fits your needs. Your local representative is ready to help you with product details, demonstrations, training, or purchase information.

VMS™ is a 2½ D metrology software, with powerful parametric programming and built-in scripting for the creation of custom routines and user interfaces. VMS provides extensive capabilities that allow the software to easily handle difficult lighting conditions, weak edges, and part-to-part variability. Area Multi-Focus (AMF) creates a high-resolution 3D data set from a normal autofocus pass, offering a high throughput alternative to laser surface scanning. Continuous Image Capture (CIC) synchronizes illumination with camera frame acquisition and stage movement to acquire video images while XY stages are in motion. Native video® processing capability allows saved images to be measured using the same analysis tools as live images.

From creating part measurement routines to operating an OGP system in a production work environment, Measure-X® metrology software offers power without intimidation. Measure-X® features a full set of image processing and autofocus tools, geometric functions, ANSI/ISO tolerances, easy editing, and contour analysis. Compatible with touch probes, laser, and rotary indexers. Users can address more complex GD&T requirements such as profile, and true position of features when datum features of size allow mobility on the feature and the datums. The display and reporting capabilities with analysis provide both graphical, color-coded whiskers of deviation, and GD&T callouts on the part CAD.

MiCATPlanner enables more flexible measurement by complying with customizable measuring rules that can be set as needed. Depending on the feature type, size, and other criteria, the operator sets the number of measuring points, their distribution, and speed for touch-trigger or scanning probes. Several sets of rules may be applied simultaneously according to manufacturing or customer requirements. Save up to 95 percent on CMM part program creation time. Reduce parts programming labor costs. Minimize potential costly and damaging probe collisions. Ensure maximum efficiency with a virtual pre-run measurement program. Select characteristics, features, and measurement point sets to include or exclude from the measurement plan. Automatically apply individual or global measurement strategies for all part programs or specific programs. Explain features that can’t be measured like missing GD&T, probe angle not defined, etc.

ZONE3® Metrology Software represents a totally new way of working with multisensor measurement systems and provides faster, easier, and more productive measurements than ever before. Its interface clearly displays relationships between parts, sensors, datum alignments, and machine accessories. Truly sensor independent with full multisensor capability, including OGP’s most advanced sensor options, without the need to specify a primary sensor. Intelligent routine optimization makes sure steps are run as efficiently as possible by reducing machine movements and measuring features that can be seen at the same time simultaneously. Auto path generation uses CAD or user-entered nominals.

MCOSMOS is Mitutoyo’s proprietary metrology suite of interrelated modules and dedicated expansion modules for Microsoft Windows 7, 8, 8.1, and 10 operating systems (32- or 64-bit). Available in 37 countries and 12 different languages, MCOSMOS sets the world’s standard for metrology software. MCOSMOS allows for integration among a whole series of applications, improving the efficiency of your CMM and bringing greater productivity to your quality control functions. Expansion modules such as GEOPAK are available for specific applications including gear measurement, airfoil analysis, reverse engineering, and integrating CAD with metrology. The modular MCOSMOS system gives you the ability to tailor your measuring software so that it includes only the specific modules needed to meet requirements. Measurement results may be displayed, printed, and archived with numerous built-in and user-defined formats.

The MeasurLink quality management software from Mitutoyo delivers complete support for your manufacturing process control system. MeasurLink 9 offers online data collection, SPC charts and analysis, and quality control/supervisor reports and alerts for your entire manufacturing system — all in real-time. Designed to create a quality information-sharing system for integrated networks, MeasurLink includes a comprehensive data collection metrology solution for your company. MeasurLink real-time standard functions as a data acquisition clearinghouse by enabling you to connect and acquire data from virtually any measuring device. It supports the full range of metrology technology including calipers, micrometers, indicators, CMMs, vision systems, and more.

Hexagon Manufacturing Intelligence works with manufacturers to create solutions for the smart factory. Our hardware and software solutions use data to connect departments, embed continuous learning into all stages of the production process and place intelligent quality at the heart of the product lifecycle. With data informing decision-making from concept to reality, quality drives productivity. From hand tools to automated solutions, coordinate measuring machines (CMMs) to portable measuring arms, laser trackers and optical scanners, Hexagon Manufacturing Intelligence provides industrial metrology systems for when dimensional measurement matters. Hexagon Manufacturing Intelligence is the largest software developer in the metrology industry and offers a wide range of in-house developed, individually-customizable software packages that deliver intelligent and effective data acquisition, analysis and evaluation as well as powerful data management and reporting tools.